User`s guide

11-2 YesWare conference room and meeting services
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Conference Room Billing
Conference Room Billing is set up using the Conference Scheduler module.
Conference Room Billing is IP-based conference room service for customers
who do not want/need YesWare’s network address translation (NAT)
capability. The Conference Scheduler module allows visitors with static,
routable IP addresses on the ETH 1 side of the YWS to access the Internet
without undergoing NAT.
Conference Scheduler network architecture
Figure 11-1 shows the architecture of the Conference Scheduler network. The
Conference Scheduler module allows visitors from the VBN (ETH 1) side of
the YWS to pass through the host network (ETH 0) side, and on to a
LAN/WAN without receiving InterProxy services. The Conference Scheduler
does this by creating a separate logical, routable network subnet using logical
port ETH 1:0. The ETH 0 interface serves as the subnet gateway and transmits
Conference Scheduler attendee traffic to and from this subnet.
Figure 11-1
Conference Scheduler Network Architecture