User`s guide

Customizing the VBN web site 10-9
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Splash Window Configuration options
The Splash Window Configuration options listed in YesWare offers the
following home/splash page settings to the service-provider:
• Splash in existing window: The home/splash page appears in the same
browser window that the visitor used to authenticate. In this configuration,
the home/splash page of the service-provider serves as an Internet "portal,"
and will replace any home page configured on the visitor’s computer.
• Splash in new window: In this configuration, the home/splash page
appears in a separate browser window after the visitor authenticates.
Visitors see their own home page after the authentication page, while the
service-provider page appears elswhere on the desktop where it can be
viewed or closed by the user.
• Splash disabled: In this configuration, no splash page appears. Visitors
see their own home page after the authentication page.
Figure 10-3 on page 10-10 shows the Elastic Networks home page used as the
default VBN home page.
Table 10-7
Custom Look and Feel Settings and Options
Custom Look and Feel
Setting
Configuration Options
Splash Window Configuration In this field, choose how you'd like the splash
window to appear:
• Splash in new window with toolbar
• Splash in new window without toolbar
• Splash in existing window
• Splash disabled
See “Splash Window Configuration options” below.
Splash Window Configuration/
Height and Width
For new popup splash windows, specify the height
and width in pixels.
Branding Options Not used
The name of your high-speed
service:
Enter the name assigned based on local office
procedures.
Check here if you want to allow
auth codes to be used in guest
rooms
Not used. This field should always
be checked.