User`s guide

YesWare PMS integration 9-13
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Table 9-3
HOBIC One-Way configuration settings
HOBIC One-Way
setting
Default
Value
Specifications and Entry Requirements
localFacility 2 YWS internal log facility. Do not edit this field.
digits ’’ Enter the digits between single
quotes that the PMS system should
substitute for the dialed digits in ALL call records fields. For example,
enter the digits '800-123-4567' in this field and the PMS will substitute
these digits in place of any call record, regardless of the number dialed.
Leave the field in the default setting ( '' ) and no substitution will occur.
serialPort /dev/pms YWS internal serial port setting. Do not edit this field.
bits 8 Enter number of bits used for COM port communications.
bufferSize 100 Not applicable in HOBIC One-Way configurations. Do not edit this field.
digitsPos 40 Enter the desired start position for the dialed digits field in outgoing call
record.
stopBits 1 Enter number of stop bits used for COM port communications
parity N Enter N
if parity is not used for COM port communications. Enter E if
even parity is used, or enter O
if odd parity is used.
baud 9600 Enter baud rate used for COM port communications. Acceptable baud
rate values include: 1200|2400|9600|38400