User`s guide

9-12 YesWare PMS integration
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
HOBIC One-Way configuration requirements
The HOBIC One-Way configuration uses the hobic file to format output. The
HOBIC One-Way configuration does not send an ENQ, and does not accept
acknowledgment after a record is sent. This configuration should only be used
for output from the YWS to a serial printer.
Figure 9-5 shows the default hobic file configuration dialog. Table 9-3 on page
9-13 contains the entry requirements and recommendations for each field in
the dialog.
Figure 9-5
HOBIC One-Way configuration dialog