User`s guide

YesWare PMS integration 9-5
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 9-1
Connecting the YWS to the PMS
Use this procedure to select and connect the YWS to the PMS as described in
“YesWare PMS integration process” on page 9-2.
Requirements
This procedure requires the following:
• two RS232 straight cables
• RS232 mini-tester similar to the one shown in Figure 9-3
• available RS232 connection on the PMS interface
• known RS232 DTE device connection such as a PC serial COM port or the
YWS COM 1 port
Figure 9-3
RS232 Mini-tester
—continued—