User`s guide

Provisioning the Ethernet-VBN switches and ports 7-25
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 7-6
Using the Refresh Switches function
Use this function to re-enable all switches connected to the YWS. The Refresh
Switches function is located in the System Tools section of Port Manager.
Action
Step Action
1 Click the Refresh Switches
link to initiate the "Switch Connectivity Refresh"
process. This process refreshes all switches in the system firewall and re-
enables all switches in the database.
Figure 7-16 shows the "Switch Connectivity Refresh" dialog. All switches
found in the database are listed by IP address in this dialog.
Figure 7-16
Switch Connectivity Refresh
STOP
You have completed this task.