User`s guide

7-16 Provisioning the Ethernet-VBN switches and ports
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 7-3
Testing the Ethernet-VBN system Configuration
After you have provisioned all ports for a switch and have verified the system
architecture, use the following procedure to test the configuration of each port.
Requirements
Testing the YesWare Ethernet configuration requires the following:
• Installed LAN with Internet access
• Ethernet switches are installed
• Switches and ports are provisioned
• Network architecture has been verified (see previous procedure)
• Ethernet-enabled PC with appropriate connection and cabling for
10Base-T service
• Internet browser (release 4.0)
Action
Step Action
1 Select the port to be tested and record the port status and validation policy
provisioned settings (enabled/disabled).
2 Connect an Ethernet-enabled computer to the provisioned port.
3 Launch the Internet browser, and attempt to access the Internet by entering
a valid IP address or a Domain Name System (DNS) host name such as
http://www.elastic.com.
—continued—