User`s guide

Provisioning the Ethernet-VBN switches and ports 7-7
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Table 7-2
InterProxy-VBN/Ethernet switch configuration
Switch Setting Entry Description/Requirement
Switch type Choose "BayStack 303" or "Cisco 2900XL" for all Ethernet-VBN switches.
Switch IP Address Select the IP address of a switch provisioned previously using the Add/Search
Switch Address function.
Gateway Address Select the Gateway address provisioned previously using the Add Gateway
Address function.
Subnet Mask Select the Subnet Mask address provisioned previously using the Add Subnet
Mask function.
Physical location Text entry field defined according to local office procedures.
Number of high
speed ports
Number of high speed or auxiliary ports installed/used on the switch. YesWare
can support up to two high speed/auxiliary ports on Ethernet-VBN switches.
Parent switch IP
address
IP address of the "Parent" switch of the switch being configured. For the YesWare
Server (Network Services System), select "None".
Parent switch port Enter the port on the Parent switch supporting the switch being configured. For
the "highest" Ethernet-VBN switch with the parent being the Network Services
System (YWS), enter "1".
Switch status Enabled or Disabled. Select enabled if the switch will support service immediately.
Disabled switches do not support YesWare services.