User`s guide

Provisioning the Ethernet-VBN switches and ports 7-5
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Ethernet-VBN TCP/IP addressing guidelines
All Ethernet-VBN switches must have assigned IP addresses. Ethernet-VBN
IP addresses must be identically assigned in both the switch console interface
and the YesWare Port Manager module. Because the Ethernet-VBN switches
receive routing from "behind" the InterProxy / ETH 1 interface, Ethernet-
VBN IP addresses can be assigned by the YesWare system manager or
administrator, and do not have to be valid for the host LAN. However, the
assigned switch IP addresses must conform to basic TCP/IP addressing
conventions.
Table 7-1 lists the IP addressing guidelines developed by Elastic Networks.
The guidelines in Table 7-1 are intended only as suggestions. A host network
administrator may develop an addressing scheme that better fits the particular
system management configuration.
Table 7-1
Ethernet-VBN IP addressing guidelines
Ethernet-VBN IP setting Recommendation
ETH 1 IP address (default) 10.237.1.1
ETH 1 network mask (default) 255.0.0.0
DHCP Pool Start 10.237.1.2
DHCP Pool End 10.237.3.254
Ethernet-VBN switches 10.240.x.y