User`s guide

EtherLoop system provisioning 6-19
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 6-2 (continued)
Provisioning Modem Connection Billing
Step Action
9 If required, add modem MAC address privacy filters as described in
Procedure 13-1 on page 13-3.
10 Select NSS Maintenance from the YesWare Main Menu to launch the NSS
Maintenance module page.
11 In the System Maintenance section, click Validate the Modem Database
.
The EtherLoop Modem Database Validation dialog appears similar to the one
shown in Figure 6-15.
Figure 6-15
EtherLoop Modem Database Validation dialog
12 Connect a PC to as many provisioned CPE modem ports as the installation
schedule will allow (at least 10%). Test the system configuration by
attempting to browse the Internet/WAN.
STOP
You have completed this task.