User`s guide

EtherLoop system provisioning 6-17
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 6-2 (continued)
Provisioning Modem Connection Billing
Step Action
8 In the EtherLoop Modem Provisioning section, use the Cpe Modem
Configuration dialog to complete the site-specific provisioning of the CPE
modems.
Figure 6-14 shows the default Cpe Modem Configuration dialog. Table 6-4
on page 6-18 lists and describes the acceptable and required entries for this
dialog.
Figure 6-14
Cpe Modem Configuration dialog
—continued—