User`s guide

6-16 EtherLoop system provisioning
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 6-2 (continued)
Provisioning Modem Connection Billing
—continued—
Table 6-3
CO modem provisioning parameters
CO Modem
Configuration
Parameters
Parameter description
CO MAC Address
(REQUIRED)
MAC address of the CO modem automatically generated by Find New Modems
function, or manually entered in this field.
Note: MAC addresses manually entered in this field without colons will be
rejected. See “EtherLoop modem MAC addressing conventions” on page 6-25.
IP Address Not used
Subnet Mask Not used
Gateway Address Not used
Modem Identifier Not used
Modem Class Not used
Location
(REQUIRED)
Text field entry indicating location of CO modem such as "120-1-1-1" for a 120
modem in rack-1/shelf-1/slot-1. Entry should be determined according to local
office procedures.
Broadcast Storm
Threshold
Not used
IP Enabled
(true/false/undef)
Not used
Link Status
(true/false/undef)
Not used
Firmware Version Not Used
FPGA Modem
Version
Not Used
FPGA BTEQ
Version
Not Used
Hardware Revision Not Used
Comments
(OPTIONAL)
Text field entry describing modem, facility, location, etc.