User`s guide

EtherLoop system provisioning 6-15
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 6-2 (continued)
Provisioning Modem Connection Billing
Step Action
6 Select Port Manager from the YesWare Main Menu to return to the Port
Manager module page.
7 In the EtherLoop Modem Provisioning section, use the Co Modem
Configuration dialog to complete the site-specific provisioning of the CO
modems.
Figure 6-13 shows the default Co Modem Configuration dialog. Table 6-3
on page 6-16 lists and describes the acceptable and required entries for this
dialog.
Figure 6-13
CO Modem Configuration dialog
—continued—