User`s guide

EtherLoop system provisioning 6-9
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 6-1 (continued)
Provisioning Enhanced Modem Billing
Step Action
16 Use the Port Configuration dialog to complete the site-specific provisioning
of the port.
17 Click the "update" button to configure the port in the database. After the
system processes the command, the system will display the Port List table
with the new port configuration added to the end of the port list.
18 Repeat steps 16-17 for all CO modem ports in the system
Figure 6-7 shows an example of a completed Port Configuration dialog.
Figure 6-8 shows an example of two ports configured in the Port List table.
Table 6-2 on page 6-10 lists the required entries for the Port Configuration
dialog.
Figure 6-7
Completed Port Configuration dialog
Figure 6-8
Configured ports in the Port List table
—continued—