User`s guide

6-8 EtherLoop system provisioning
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 6-1 (continued)
Provisioning Enhanced Modem Billing
Step Action
12 In the Port-Based Modem Billing Manager dialog, verify that Enhanced
Modem Billing is not enabled. Click the "Use Enhanced Modem Billing" button
to enable Enhanced Modem Billing.
13 When the system displays that Enhanced modem billing is enabled, select
Port Manager from the YesWare Main Menu to return to the Port Manager
module page.
14 Select View/Edit Port Table
from the Ethernet Switch and Port
Provisioning section of Port Manager to launch the Port List dialog. The
Port List dialog contains all ports found in the database. If Enhanced Modem
Billing is properly enabled, the Port List dialog will list the MAC addresses of
the CO modems in the "Switch IP Address" field associated with each port.
Figure 6-6 shows an example Port List dialog with two unconfigured ports
shown.
Figure 6-6
Port List dialog
15 Click the edit
link next to the desired port to launch the Port Configuration
dialog.
—continued—