User`s guide

VBN gateway and Network Services System switch configuration 5-7
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 5-1 (continued)
Provisioning the VBN gateway and Network Services System switch
Step Action
12 In the Ethernet Switch and Port Provisioning section, select Add Ports
to
launch the Select A Switch dialog as shown in Figure 5-5.
Figure 5-5
Add Ports
/ Select A Switch dialog
13 Select the Network Services System switch and click Continue to launch the
Configure Port dialog.
14 In the Configure Port (or Port Configuration) dialog, provision the single
Network Services System switch port. Figure 5-6 shows an example of a
completed Network Services System port configuration.
Table 5-2 on page 5-8 lists the complete requirements for the Network
Services System port settings. See Chapter 7, “Provisioning the Ethernet-
VBN switches and ports” for more information.
Figure 5-6
Configure Port dialog
—continued—