User`s guide

5-4 VBN gateway and Network Services System switch configuration
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 5-1 (continued)
Provisioning the VBN gateway and Network Services System switch
Step Action
5 In the System Setup section, select Add/Search Gateway Address
.
The Gateway Address Configuration dialog appears as shown in Figure 5-2
on page 5-4.
Figure 5-2
Gateway Address Configuration dialog
6 Enter the ETH 1 IP address in the Gateway Address field, and click Add.
7 In the System Setup section, select Add/Search Subnet Mask.
The Subnet Mask Configuration dialog appears as shown in Figure 5-3.
Figure 5-3
Subnet Mask Configuration dialog
8 Enter the Subnet Mask and click Add. This mask must be the same as the
"Network Mask" that was configured for the ETH 1 secondary port in the
"InterProxy Configuration Page."
—continued—