User guide

Using EtherCraft 6-7
Software Release 3.00 StormTracker-Site Manager and Administration User Guide 08-01148-01-200
Check Speeds
Use this operation to check the transmit speeds of selected client or server
modems. You can display the following values for training results based on
training at different speeds.
• Type of modem—client or server modem.
• Speeds—shown using codes to represent QAM16 and QPSK values
• Mac address for the modem along with its training counts—training counts
are interpreted using codes to indicate the results of training at different
speeds
Access this function from the EtherCraft page by clicking the Check Speeds
button. Figure 6-1 shows the Check Speeds page.
Figure 6-1
EtherCraft Check Speeds page