User guide

6-6 Using EtherCraft
Software Release 3.00 StormTracker-Site Manager and Administration User Guide 08-01148-01-200
Table 6-3
Check Speed training count interpretation
Code Description
15 Modem has been trained, speed has been used and
the LQF is > or = 98%
11 thru14 Modem has been trained, speed has a high LQF but
has burned off at least once.
10 Modem has been trained, the speed has not been
used, or the modem has used the speed and the LQF
is between 85-98%
1 thru 9 Modem has been trained, but burned off at least once
because of LQF or SNR problems
0 Modem has not been trained, or once modem was
trained was burned off because of poor LQR or SNR
-1 thru -5 Modem has failed to this this many times. The
modem will not attempt to retrain a speed with a -5 or
-3 training count. Once per hour the modem will set
all untrained speeds to -4 to allow another training
attempt for that speed.
-6 Modem has been marked as untrainable because the
firmware determined the apparent distance between
modems was too long to support this speed
-7 Modem has been marked as unusable.
-10 Modem is currently being trained
NA Modem was unavailable to determine its training
count at that particular speed