User guide

4-12 BitStorm™ Server administration
Software Release 3.00 StormTracker-Site Manager and Administration User Guide 08-01148-01-200
Procedure 4-3
Verifying the server network connection
Use this procedure to verify the ETH 0 and ETH 1 network settings to serve
a VBN system.
Action
Step Action
1 Using a PC web browser, browse to the IP address configured for the ETH 0
interface, and login to the Administration software group.
2 Select the Network
operation from the System function to launch the
"Network Configuration" dialog. Figure 4-11 shows an example of this dialog.
Figure 4-11
Network Configuration dialog
3 Verify the ETH 0 network settings and modify the ETH 1 settings as
necessary.
Note: Only modify the ETH 0 settings if instructed to do so by the LAN
administrator.
4 Record the values in the "Network Configuration" dialog according to local
office procedures. These values will be needed for some of the provisioning
tasks performed later.
STOP
You have completed this task.