User guide

BitStorm™ Server administration 4-5
Software Release 3.00 StormTracker-Site Manager and Administration User Guide 08-01148-01-200
Network page
Figure 4-5 shows the Network page. System administrators should always use
this command or the equivalent in the StormTracker-Configuration Manager
to shutdown the BitStorm Server. If at all possible, never use only the power
switch to shutdown the BitStorm Server, as this could corrupt the unit’s file
system.
Figure 4-5: Network page
Table 4-1 defines each of the entries in the Network page.
Table 4-1: Network Configuration page
Field Description
Hostname The host name given by the LAN administrator to the BitStorm Server on
the host network.
IP Address - primary port
(eth0)
ETH 0 is the BitStorm Server’s interface to the host LAN. This field is the IP
address given by the LAN administrator to the BitStorm Server on the host
network.
Network Mask - primary port
(eth0)
The Network Mask for ETH 0 is given by the LAN administrator to the
BitStorm Server on the host network.
Gateway Address The Network Mask given by the LAN administrator to the BitStorm Server
on the host network.
IP Address - secondary port
(eth1)
ETH 1 is the BitStorm Server’s interface to the YesWare-VBN. This field is
the VBN IP address assigned by the BitStorm Server administrator.
Network Mask - secondary
port (eth1)
This field is the VBN Network Mask assigned by the BitStorm Server
administrator.