User guide

3-12 BitStorm Server host network configuration
Software Release 3.00 StormTracker-Site Manager and Administration User Guide 08-01148-01-200
Procedure 3-1 (continued)
Configuring the BitStorm Server host network interface
Step Action
6 Enter the valid network mask (subnet) address assigned to the BitStorm
Server ETH 0 network interface. The system should appear similar to the
following:
7 Enter the valid gateway IP address assigned to the BitStorm Server ETH 0
network interface. The system should appear similar to the following:
8 Enter the host name assigned to the BitStorm Server ETH 0 network
interface. If the BitStorm Server will use the Domain Name System (DNS),
the BitStorm Server must have a valid DNS host name. The system should
appear similar to the following:
—continued—