User guide

Introducing the BitStorm™ Server software and system applications 1-11
Software Release 3.00 StormTracker-Site Manager and Administration User Guide 08-01148-01-200
BitStorm™ Server system installation process
The process of installing a Bitstorm™ Server system, in broad terms, includes
the following:
1 Install the TCP/IP Ethernet local host LAN/WAN network to support the
BitStorm Server connection (if none existing).
2 Install the EtherLoop and/or Ethernet infrastructure.
3 Configure the BitStorm Server on an existing local host LAN/WAN.
4 Set up BitStorm Server administration.
5 Provision the EtherLoop infrastructure to support StormTracker-Site
Manager OAM&P
6 Provision YesWare-VBN services.
This manual covers steps 3 through 5 of the BitStorm™ Server system
installation process. The YesWare-VBN Applications User Guide contains the
provisioning requirements for YesWare-VBN systems.
Organization of this manual
This document provides procedures for setting up the BitStorm Server on the
local host network and for provisioning the EtherLoop system infrastructure.
In general, the information is presented in the order in which you will need to
use it.