User guide

7-8 Using the Downloader module
Software Release 3.00 StormTracker-Site Manager and Administration User Guide 08-01148-01-200
Procedure 7-2 (continued)
Upgrading from Generation 1 to Generation 2 modem firmware
Step Action
5 In the Downloader Main Menu, select "Gen-1 to Gen-2" upgrade to launch the
Gen-1 to Gen-2 Upgrade Menu.See Figure 7-4.
Figure 7-4
Gen-1 to Gen-2 Upgrade Menu
6 Use the "Target Gen-2 Code File" pull-down menu and select the newly-
uploaded Gen-2 firmware load. The remaining Files To Download
("Transition Gen-1 Code File," "Transition FPGA File," and "Transition
Bootcode File") firmware loads are autofilled by the system.
7 In the "Gen-1 Modems To Convert" section of the page, select the modem
database and modems to receive the upgraded firmware code.
8 Click the "Begin Gen-2 Upgrade" button to begin upgrading the modems and
modem database.
—continued—