Specifications

A-6
Appendix A - ELMo 120 Multiplexer installation requirements
Revision 2.01 ELMo 120 Multiplexer Installation and Maintenance Guide 08-01023-01
ELMo 120 Multiplexer installation tools and materials
The tools and materials required to install the ELMo 120 shelf include the
following:
• 4-bay mounting screws
• 1-medium Phillips-head screwdriver
• 1-cross-connect block matching the existing blocks used in the facility
MDF, such as Siemon R66, BIX, or AT&T 110 cross-connect blocks
• 1-wiring punch-down tool intended for use with the cross-connect block
• cross-connect jumper wires (24 AWG, quantity varies) for tip/ring
connections
ELMo 120 Multiplexer shelf physical characteristics
This section specifies the physical dimensions and weight of the
ELMo 120 modem and voiceband filter shelves.
Table A-3
ELMo 120 shelf weight and dimensions
Specification Value (metric)
Wei
g
ht (with cards) 45 lbs. (20 k
g
)
Hei
g
ht 12 in. (30.5 cm)
Width 19 in. (48.3 cm)
Depth 12 in. (30.5 cm)
Table A-4
Filter shelf weight and dimensions
Specification Value (metric)
Wei
g
ht (with cards) 15 lbs. (7 k
g
)
Hei
g
ht 7 in. (18 cm)
Width 19 in. (48.3 cm)
Depth 12 in. (30.5 cm)