Specifications

Appendix A - ELMo 120 Multiplexer installation requirements
A-5
Revision 2.01 ELMo 120 Multiplexer Installation and Maintenance Guide 08-01023-01
ELMo 120 Multiplexer installation accessory requirements
Table A-2 lists the cables and accessories required for the ELMo 120
installation. See Appendix B for more information about the ELMo 120
Multiplexer cables.
Table A-2
ELMo 120 cabling
Part description Elastic Networks
Part Number
Function Quantity required
ELMo 120 Multiplexer
cable harness
04-00007-10 Connects ELMo 120
Multiplexer or filter shelf to
intermediate cable
One harness for every two
ELMo 120 modems or
voiceband filter cards
Intermediate Cable
(50 ft.)
04-00009
/10/11-50 Connects cable harness to
EtherLoop cross-connect
One cable for every ELMo
120 Multiplexer cable
harness
Data Jumper Cable 04-00008-18 Connects filter shelf to
ELMo 120 Multiplexer
One cable for each
filter/modem card pair
ELMo 120 Multiplexer
Power Harness
04-00012-18 Connects ELMo 120
Multiplexer to -48 V dc
power source
One harness for every
ELMo 120 Multiplexer
shelf
Cate
g
ory 5/RJ-45
Cable/Cross-over
(4/6/8 ft.)
04-00001-4/6/8 See Table 2-1, “Data cable
selection” on pa
g
e 2-10
One cable for each
connection from the ELMo
120 Multiplexer to the data
network
Cate
g
ory 5/RJ-45
Cable/Strai
g
ht
(4/6/8 ft.)
04-00002-4
/6/8 See Table 2-1, “Data cable
selection” on pa
g
e 2-10
One cable for each
connection from the ELMo
120 Multiplexer to the data
network
Air Baffle Assembly 03-00003-01 Assists with shelf heat
dissipation/coolin
g
One for each ELMo 120
Multiplexer shelf or ELMo
120 Multiplexer/filter shelf
pair
Kick Bar 03-00002-01 Protects shelf from
physical dama
g
e
One for each bay, installs
at bottom of rack