Specifications

ELMo 120 Multiplexer installation and testin
g
2-23
Revision 2.01 ELMo 120 Multiplexer Installation and Maintenance Guide 08-01023-01
Installing the connections to the external voice facility (continued)
Step Action
3
Remove the Tip and Rin
g
jumper connections from the line.
4
Terminate the Tip/Rin
g
jumper wires from the cross-connect of the external
voice facility to the "Voice" side of the EtherLoop cross-connect.
5
Terminate the jumper wires from the CPE Tip/Rin
g
connections to the
"EtherLoop" side of the cross-connect block.
6
Verify the new connection by testin
g
dial tone a
g
ain at the CPE cross-connect
block. Modem traffic "noise" should be heard at this point.
7
Secure all cablin
g
in accordance with local office procedures.
8
Record the EtherLoop cross-connect Tip/Rin
g
assi
g
nments for the voice
facility accordin
g
to local office procedures.
This concludes the ELMo 120 Multiplexer voice/data installation.
9
Go to “Testin
g
the ELMo 120 Multiplexer installation” on pa
g
e 2-24.
STOP
You have completed this task.