Specifications

ELMo 120 Multiplexer installation and testin
g
2-11
Revision 2.01 ELMo 120 Multiplexer Installation and Maintenance Guide 08-01023-01
Installing the data network connection (continued)
Action
Step Action
1
Connect one end of the Cate
g
ory 5 cable to the Ethernet 10/100Base-T data
network supportin
g
the ELMo 120.
2
Route the other end of the cable to the Ethernet 10/100Base-T Switch card
slot on the front of the ELMo 120 Multiplexer modem card shelf.
Figure 2-6 shows a typical ELMo 120 data network connection
requirements.
Figure 2-6
Typical ELMo 120 data network connection requirements
—continued—
Wide Area
Network
LAN/WAN
Termination
LAN Router
LAN Hub
EtherLoop Hub
YWS Eth1
10Base-T
Switch Card
10/100Base-T
RJ-
45
RJ-
45
YesWare
Server
RJ-
45
ELMo
120
YWS Eth0
10Base-T