Specifications

2 BitStorm 1900 Installation and Testing Elastic Networks
2-76 BitStorm 1900™ Installation and Maintenance Guide 08-01101-01, Rev. 1.50
Step Procedure cont.
3.) Connect the RJ-45 plug to one of the two the RJ-45 receptacles on
the front faceplate of the BitStorm 1900 Switch card. Figure 2-13,
"Switch Card Connections."
Figure 2-13: Switch Card Connections
4.) Secure the cable in accordance with local office procedures.
5.) Repeat steps 1-4 for the second and third connections (if required).
Be sure to connect the BitStorm 1900 Access Multiplexer data con-
nections to separate LAN segments.
70
10/100Base-T
Uplink Ports
10Base-T
Craft Interface Port for
Switch Management