Specifications

Elastic Networks Appendix C: SNMP MIBs
08-01101-01, Rev. 1.50 BitStorm 1900™ Installation and Maintenance Guide C-185
Table C-13: The CPE Modem Interface Configuration Table
CPEMdmRemoteLQF The Line Quality Factor
of the HDLC link as mea-
sured by the remote CPE
modem
read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
CPEMdmFreeBufferCount The current count of free
buffers for this CPE
modem interface
read-only This would be obtained
from the extent GetMo-
demInfo (GeneralOp).
CPEMdmApparentDistance The apparent distance,
in 1000 ft units, detected
on the Etherloop
read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
The CPE Modem Interface Configuration Table
Variable Description Accessibility Implementation
CPEMdmConfigIfIndex The index for each CPE modem
Etherloop interface. This object
corresponds to MIB-II ifIndex. It
has the same value as the corre-
sponding indices of other tables
and uniquely identifies each
CPE modem Etherloop interface
Read-only This maps to the IfIndex of the
IfTable.
CPEMdmDescr A printable text string describing
this modem, in the format <hard-
ware>
Read-only This would be obtained from
the extent Capabilities (Gen-
eralOp).
This would be obtained only at
initialization time and saved in
the memory.
CPEMdmEnetIfStatus The current status of the Ether-
net interface on this modem.
Setting this object to down(2)
causes the Ethernet interface to
stop communicating
Read-write This would be obtained/
changed by the extent Get-
PortInfo/GetStatus (Gener-
alOp).
(CPEEnetEnabled)
CPEMdmMACAddress The six byte MAC address of the
Ethernet interface of this CPE
modem
Read-only This would be obtained at ini-
tialization time and saved in
memory.
The CPE Modem Interface Statistics Table
Variable Description Accessibility Implementation