Specifications

Elastic Networks Appendix C: SNMP MIBs
08-01101-01, Rev. 1.50 BitStorm 1900™ Installation and Maintenance Guide C-181
Table C-11: The CO Modem Spectrum Manager Table
COMdmIfModulation The modulation scheme
used at this speed level
on this port
read-only This would be obtained
from the extent GetMo-
demSpeedinfo
(SpeedOp).
Note: This may be
changed to get the
modulation from a
static table.
The CO Modem Spectrum Manager Table
Variable Description Accessibility Implementation
COMdmIfSpecMgrIfIndex The index for each CO
modem EtherLoop. This
object corresponds to
MIB-II ifIndex. It has the
same value as the corre-
sponding indices of other
tables and uniquely iden-
tifies each CO modem
EtherLoop
read-only This would map to the
IfIndex of the ifTable.
COMdmIfSpecMgrLogIn-
tOps
If this object is set to
on(1), then logging of the
Spectrum Manager inter-
nal operations will be
done
read-write This would be obtained/
changed by the extent
SpectrumManagerState
(SpectrumMgrOp)
COMdmIfSpecMgrMode read-write This would be obtained/
changed by the extent
SpectrumManagerState
(SpectrumMgrOp)
COMdmIfSpecMgrAction Action taken most
recently
read-only This would be obtained/
changed by the extent
SpectrumManagerState
(SpectrumMgrOp)
COMdmIfSpecMgrInterval Wake up interval, in sec-
onds, for detection
read-write This would be obtained/
changed by the extent
SpectrumManagerState
(SpectrumMgrOp)
The CO ModemSpeed Table
Variable Description Accessibility Implementation