Specifications

Appendix C: SNMP MIBs Elastic Networks
C-180 BitStorm 1900™ Installation and Maintenance Guide 08-01101-01, Rev. 1.50
COMdmIfSpeed The speed level for this
table entry.
This is the secondary
index of this table.
read-only This is the speed level
that will range from 0 to
the max speed value.
The max number of
speeds is already dis-
cussed in the CoModem-
ConfigTable, this is
obtained at the initializa-
tion time.
COMdmIfRxGain Receiver Gain read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
COMdmIfTxAtten Transmitter Attenuation read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
COMdmIfPreamp read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
COMdmIfRxTrainingCount Receiver read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
COMdmIfTxTrainingCount Transmitter read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
COMdmIfRxRetrains Receiver Retrain # read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
COMdmIfTxRetrains Transmitter Retrain # read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
COMdmIfRemoteTxAtten CPE Transmitter Attenu-
ation
read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
COMdmIfSymbolRate The symbol rateused at
this speed level on this
port
read-only This would be obtained
from the extent GetMo-
demSpeedinfo
(SpeedOp).
Note: This may be
changed to get the
symbol rate from a
static table.
The CO ModemSpeed Table
Variable Description Accessibility Implementation