Specifications

Elastic Networks Appendix C: SNMP MIBs
08-01101-01, Rev. 1.50 BitStorm 1900™ Installation and Maintenance Guide C-179
Table C-10: The CO Modem Speed Table
enEloopCOMdmIfReset If resetPort (2) is writtren
to the object, it forces the
port to reset and begin
pwer-on training. If reset-
Modem (3) is written to
the object, it forces the
modem corresponding to
the port to perform a cold
restart. A read of the
variable, if exists will
always return normal (1).
read-write The read operation
returns 1 if the interface
is active.
The write operation of:
1 will do nothing
2 will cause a ResetPort
extent to be sent to the
corresponding port, and
a COModemIfReset-
PortEvent trap be sent to
the defined trap destina-
tions.
3 will cause a ResetMo-
dem extent be sent to the
corresponding modem,
and a COModemIfRe-
setEvent trap be sent to
the defined trap destina-
tions.
The CO ModemSpeed Table
Variable Description Accessibility Implementation
COMdmIfSpeedIfIndex The primary index of this
table.
This object corresponds
to MIB-II ifIndex. It has
the same value as the
corresponding indices of
other tables and uniquely
identifies each CO
modem Etherloop inter-
face
read-only This maps to the IfIndex
of the IfTable corre-
sponding to the Ether-
Loop/Etherloop port.
The CO Modem Interface Configuration Table
Variable Description Accessibility Implementation