Specifications

Appendix C: SNMP MIBs Elastic Networks
C-178 BitStorm 1900™ Installation and Maintenance Guide 08-01101-01, Rev. 1.50
COMdmIfRecurTrngDelay The interval, in seconds,
between training bursts.
The default is 4 for 6224/
12:1 and 1 for all other
modems
read-only This would be obtained
from the extent Provi-
sionModem (Gener-
alOp).
COMdmIfForceHighSpeed If this object is Enabled,
then this modem inter-
face will always run at
maximum speed
read-write This would be obtained/
changed by the extent
ProvisionModem (Gener-
alOp).
COMdmIfModemRev The modem hardware
revision number
read-only This would be obtained
from the extent Capabili-
ties (GeneralOp).
COMdmIfModemBTEQRev The modem hardware
BTEQ revision number
read-only This would be obtained
from the extent Capabili-
ties (GeneralOp).
COMdmIfClearStats If clear(2) is written to
this object, the counters
on this interface and the
associated Ethernet port
are set to 0 and a ???
trap is sent. Reading this
object always returns a
value of normal(1)
read-write Setting this variable
would send out the
extent ClearStatistics
(GenralOp).
COMdmIfTrapStatus If the value of this object
is trapsOn(1), then all
traps for this CO modem
interface will be sent.
If the value of this object
is trapsOff(2), then no
traps for this CO modem
interface will be sent.
read-write This would be read from
or written to the MIU’s
flash memory.
The CO Modem Interface Configuration Table
Variable Description Accessibility Implementation