Specifications

Elastic Networks Appendix C: SNMP MIBs
08-01101-01, Rev. 1.50 BitStorm 1900™ Installation and Maintenance Guide C-177
Table C-9: The CO Modem Interface Configuration Table
The CO Modem Interface Configuration Table
Variable Description Accessibility Implementation
COMdmIfConfigIfIndex The index for each CO
modem EtherLoop. This
object corresponds to
MIB-II ifIndex. It has the
same value as the corre-
sponding indices of other
tables and uniquely iden-
tifies each CO modem
EtherLoop
read-only This maps to the IfIndex
of the IfTable.
COMdmIfFirmwareRev The firmware revision for
this CO modem interface
read-only This is obtained from the
extent Capabilities (Gen-
eralOp).
However, this would be
obtained only at the Ini-
tialization time and saved
as static data in the
memory.
COMdmIfCurModulation The modulation cur-
rently in use on this inter-
face
read-only This is obtained from the
extent Capabilities (Gen-
eralOp).
However, this would be
obtained only at the Ini-
tialization time and saved
as static data in the
memory.
COMdmIfSpeedCount The number of speeds
supported by CO modem
interface. This is also the
number of entries in the
enEloopCOMdmIf-
SpeedTable
read-only This is obtained from the
extent GetModemInfo
(GeneralOp).
It is obtained only at the
Initialization time and
saved as static data in
the memory.
COMdmIfBlockBroadcast If Broadcasts are
enabled, the modem will
pass them out the port
read-write This would be obtained/
changed by the extent
ProvisionModem (Gener-
alOp).