Specifications

Elastic Networks Appendix C: SNMP MIBs
08-01101-01, Rev. 1.50 BitStorm 1900™ Installation and Maintenance Guide C-175
The EnEloop CO Modem Interface Group
Table C-8: The CO Modem Interface Statistics Table
The CO Modem Interface Statistics Table
Variable Description Accessibility Implementation
COMdmIfStatsIfIndex The index for each CO modem
Etherloop interface. This object
corresponds to MIB-II ifIndex. It
has the same value as the cor-
responding indices of other
tables and uniquely identifies
each CO modem Etherloop
interfaceEtherloop interface
read-only This maps to the IfIndex
of the IfTable.
COMdmIfCurrentTxSpeed The speed level at which the
CO modem is transmitting on
this interface
read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
COMdmIfCurrentRxSpeed The speed level at which the
CO modem is receiving on this
interface
read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
COMdmIfUpTime The time, in tenths of a second,
that the CO modem for this
interface has been up
read-only This would be obtained
from the extent GetMo-
demInfo/SysUpTime
(GeneralOp).
COMdmIfTheoreticalTxSpeed The theorectical speed, in bits
per second, at which the CO
modem can transmit on this
interface
read-only This theoretical speed
can be calculated based
on the TxSpeed level (as
mentioned above) and
the modulations sup-
ported by the modem.
COMdmIfTheoreticalRxSpeed The theoretical speed, in bits
per second, at which the CO
modem can receive on this
interface
read-only This theoretical speed
can be calculated based
on the RxSpeed level (as
mentioned above) and
the modulations sup-
ported by the modem.
COMdmIfMaxTxTrndSpeed The maximum transmit speed
level at which the CO modem
has trained on this interface
read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).
COMdmIfMaxRxTrndSpeed The maximum receive speed
level at which the CO modem
has trained on this interface
read-only This would be obtained
from the extent GetPort-
Info (GeneralOp).