Specifications

Elastic Networks Appendix C: SNMP MIBs
08-01101-01, Rev. 1.50 BitStorm 1900™ Installation and Maintenance Guide C-173
EtherLoop Modem MIB
All the object names defined in this MIB start with ‘enEloop’. In order
to save space in the Variable column, and give more space to the
Description column, the prefis ‘enEloop’ is stripped off.
Table C-7: The EnEloopShelf Group
The EnEloopShelf Group
Variable Description Accessibility Implementation
ShelfStatus The operational status of the shelf.
• green(1) indicates normal opera-
tion.
• yellow(2) indicates at least one
minor alarm is present.
• red(3) indicates at that at least one
major alarm is resent. This value
corresponds to the status LED on
the front of this shelf.
read-only Not implemented in Release
ShelfCurrentA-
larms
A bitmask of all current alarm condi-
tions. The value is a sum. For a shelf
with no alarms, the value is zero. For
each alarm condition, the value of
that alarm is added to this value. The
values are:
• downAlarm (1) - MIU has detected
that the shelf is not responding.
• tempAlarm (2) - The shelf has
detected a temperature higher
than specifications allow.
• ps1Alarm (4) - The shelf has
detected that the voltage of power
supply #1 is not within tolerance.
• ps2Alarm (8) - The shelf has
detected that the voltage of power
supply #1 is not within tolerance.
• psAlarm (16) - The shelf has
detected that the voltage of power
supply #1 is not within tolerance.
read-only Not implemented in Release 1.
ShelfTemp The current temperature of the shelf
in degrees C
read-only Not implemented in Release 1.