Specifications

Elastic Networks Appendix C: SNMP MIBs
08-01101-01, Rev. 1.50 BitStorm 1900™ Installation and Maintenance Guide C-165
Supported SNMP MIBS
System Group and Interface Group of MIB-II
Table C-5: The System Group
Clearing the statistics of an inter-
face.
COMdmIfClearStats Setting the object to (2) will set all coiunters on
the interface atn the assicoiated Ethernet port to
0. A trap is sent. Reading the object returns a
value of (1).
Turning TRAPS ON/OFF COMdmIfTrapStatus Setting the object value to (1) turns on all traps on
the CO modem. All traps will be sent.
Setting the object value to (2) turns off all traps on
the CO modem. No traps will be sent
Setting the object value to (3) turns on all traps on
the CO modem except for linkDown traps.
The System Group
Variable Description Accessibility Implementation
sysDescr A textual description of the entity.
This value should include the full
name and version identification of the
system's hardware type, software
Operating System and networking
software. It is mandatory that this
should only contain printable ASCII
characters.
Read-only The returns the concatenation
of MIU hardware description
string and firmware version
string, such as “BitStorm MIU
<Firmware rev>”
The MIU software has the
information.
sysObjectId The vendor's authoritative identifica-
tion of the network management sub-
system contained in the entity. This
value is allocated within the SMI
enterprises subtree (1.3.6.1.4.1) and
provides an easy and unambiguous
means for determining `what kind of
box' is being managed.
Read-only .1.3.6.1.4.1.3855.3.1
Defined as enSysObjectIDs
Elastic Netwoeks is assigned
the subtree.1.3.6.1.4.1.3855
sysUpTime The time (in hundredths of a second)
since the network management por-
tion of the system was last re-initial-
ized.
Read-only The uptime value for the MIU
SNMP Agent.
Feature SNMP Input Variable Description