Specifications

2 BitStorm 1900 Installation and Testing Elastic Networks
2-118 BitStorm 1900™ Installation and Maintenance Guide 08-01101-01, Rev. 1.50
Step Procedure cont.
15.) If changes to the configuration have been made, the system must
be reset. Type
reset and press <Enter>, then y to confirm.
NOTE: When logging back into the MIU, the new IP Address must be entered.
Refer to Table 2-4, “CLI (Command Line Interface) Commands,”
on page 99, for additional CLI commands for remote management.
Also, refer to the Appendix C section entitled, "Craft Interface
Screens," on page 191 for additional information.
STOP