Specifications

Elastic Networks 2 BitStorm 1900 Installation and Testing
08-01101-01, Rev. 1.50 BitStorm 1900™ Installation and Maintenance Guide 2-111
Using SNMP Network Management Software
If the client is using SNMP Network Management Software, Elastic
Networks’ private MIB must be loaded into the user’s SNMP Network
Manager using the procedure accompanying the specific Network
Management Software.
A list of all supported MIBs and the Elastic Networks’ private MIB can
be found in "Appendix C: SNMP MIBs," on page 163 of this document.
Elastic Networks’ private MIBs can be downloaded from the Elastic
Networks FTP site. Contact the Elastic Networks Customer Satisfac-
tion organization for instructions on how to access the FTP site. Refer
to Table 4-1, “Customer Satisfaction Contact Information,” on
page 131.
Using Telnet for Remote Provisioning and Management
NOTE: Before using the Telnet option for remote management, the MIU must
first be configured using the craft interface. This procedure is manda-
tory as an MIU I.P. address is required when accessing the MIU
remotely.
The following steps and procedures are provided to aide in configuring
the MIU and setting the traps. (This is intended as a brief overview.
Refer to "Appendix C: SNMP MIBs," on page 163 for more detailed infor-
mation.)
Step Procedure
1.) Initiate a Telnet session:
a.) From Windows, click on the Start button, then select Run.