Installation guide

Installing the StormPort 405 Modem 1-15
Revision 1.00 StormPort 405 Modem Installation Guide 08-01141-01
6 If necessary, secure any slack or loose RJ-11 cord using the enclosed
tie clamps.
7 Connect the rounded plug end of the power supply cord into the 5V AC
connector on the rear of the StormPort 405.
8 Plug the power supply into wall outlet. This completes the StormPort
405 physical installation. At this point, the Link and Data Status
indicator lights should be green.
Note: See “Modem Indicators” on page 1-16 for more information on
the StormPort 405 LED indicators.
STOP
You have completed this task.