User manual

ELARA 7371000 25.9.98 Page 37
In SUPER USER Mode the presets and
memory functions are disabled. The user
has the options of setting recovery to on
or off, clearing all the programmed
memories, and saving or loading memory
data.
WARNING
Only a Zero 88 memory module
should be connected to the 9 pin D
type connector on the rear panel of the
desk. It is advisable to switch the desk
off before connecting or disconnecting
the memory module.
Entering Super User Mode
Press and hold down the STEP + and
STEP - buttons together, and then press
and hold the MODE button for 1 second.
The SUPERUSER light above the MODE
button comes on. The DISPLAY shows
the software version.
Exiting Super User Mode
To exit SUPER USER mode press and
hold the MODE button for 1 second. The
desk will return to PROGRAM mode.