User manual

Clearing/Deleting a Sequence
It is possible to clear a sequence
completely in one operation.
1. Select a programmed sequence as
described above.
2. Press and hold the CLEAR button for
1 second. All the programmed steps
will be cleared and the DISPLAY
shows “00” indicating an
unprogrammed sequence.
Reviewing a Sequence
The user can review the contents of a
sequence while in PROGRAM Mode.
1. Select a programmed sequence as
described above.
2. Use the STEP + and STEP - buttons
to move through the steps in the
sequence. The lights next to the
MEMORY PAGE button show the
page number, and a light in one of
the CHANNEL FLASH buttons is
illuminated to indicate the memory
programmed into the current step.
The contents of the memory are
output live.
Page 26 ELARA 7371000 25.9.98
Program Mode