User's Manual

No Pictures or Sound
Power ON/OFF switch in right position.
Check all the cables well and rightly connected.
9
Receiver can not work properly when connecting
with PC
Check PCI capture card and software / driver installed correctly.
Make sure the surveillance system work properly if connecting with TV.
Check all the cables well and rightly connected when connecting with PC.
Check the channels of wireless camera and receiver at the same one.
Check the DC adaptors rightly connected.
6. TROUBLE SHOOTING
Please read this user's manual carefully before using the Wireless Surveillance
System. If you still have difficulties to use the Wireless Surveillance System
consult the following syndrome, which will guide you to solve most common
problems.
Interference in the Image and Sound
Move your Wireless Camera or Receiver slowly to find a best reception position.
Shorten the distance between your Camera and Receiver.
Check if there is any interference radio frequency source near your Receiver
source such as microwave oven or others 2.4 G z electronic products.
Switch channels of both Camera and Receiver to another channel;
e.g. from C 1 to CH3.
H
H