User`s guide

ELAN HOME SYSTEMS

USER'S GUIDE

Dedicated Remote Control Use In a Multi-Room System

In rooms that have TVs with VIA!dj graphics available, but do not have VIA! Touch

Panels, you may wish to have a dedicated VIA!dj remote control for that speciﬁ c room.

Your VIA!dj remote control can be conﬁ gured so that every button press indicates to the

VIA!dj which output is to be controlled. This means that whenever IR is received by the

VIA!dj, the VIA! Touch Panel and/or TV display will automatically switch to controlling

the appropriate output.

To conﬁ gure the remote with a default output:

• Press the Audio Server and Select buttons simultaneously; hold them

down for 1 second.

The Audio Server button will remain lit for 20 seconds; the conﬁ guration process must

be completed during this time.

• Enter the 3 digit code corresponding to the output you would like to control

(valid conﬁ gurations are listed below). For example, to set Output 2 as your

default output press: 0, 0, 2.

• Press the Audio Server button again.

Output Code

Output 1 0, 0, 1

Output 2 0, 0, 2

Output 3 0, 0, 3

Output 4 0, 0, 4

The Audio Server button will blink twice to indicate that the conﬁ guration has been ac-

cepted. If the Audio Server button does not blink twice, begin the process again-taking

care to enter the number correctly.

If the VIA!dj is switched on during the conﬁ guration process, the Enter Standby?

prompt will appear once conﬁ guration is complete. Press Cancel to return to the

previous screen.

Now, pressing any navigation key on the remote should cause the VIA!dj to switch to

the correct output. To return the remote control to factory default Output select

operation:

• Follow the above procedure and enter 0, 0, 0 as the 3-digit code.

Select