User`s guide

ELAN HOME SYSTEMS
USER'S GUIDE
Page 34 ©2006 ELAN Home Systems All rights reserved.
II
Switching Audio Outputs
The VIA!dj is capable of playing different music in several rooms simultaneously. If you
wish to play music in a particular room, you must fi rst choose the correct Audio Output.
To Select an Audio Output:
• Press the 1, 2, 3, or 4 buttons at the top of the VIA!dj GUI that corresponds to
the desired Output.
Or:
• Press the Output button on the remote control repeatedly until the desired
Output is accessed.
Note: The VIA!dj-S is a single output device and therefore cannot switch between
Audio Outputs.
The VIA!dj Display
Because the VIA!dj has only one video output, it is important to understand what you
may be viewing on a VIA! Touch Panel at any given moment.
• When fi rst selecting something to play from a VIA! Touch Panel, the music you
hear and the Album details displayed will match up.
• If a person in another zone selects the same VIA!dj output that you are listening
to, they will automatically be listening to the same music and viewing the details
that you are. Your music will continue uninterrupted.
• If a person in another zone selects a different VIA!dj output, your music will con
tinue uninterrupted but the Album on your VIA! Touch Panel will now refl ect the
selection that was made by the person in the other zone.
• If you wish to once again view the Album details of the music you have select-
ed, simply press Active.
The Active button re-syncs the video display to the audio output selected in your
zone.