Specifications

Amplifiers
©2009 ELAN HOME SYSTEMS • LEXINGTON, KY • ALL RIGHTS RESERVED
51
D12 12-CHANNEL DIGITAL POWER AMPLIFIER
Also Available in 240VAC Version (Order No. D12-240)
ORDER NO. D12
NEW
FOR
2009
Introducing the latest in ELAN digital amplifier
design and innovation – the D12.
Designed, built and rigorously tested for
outstanding reliability and sound, the D12 achieves
a new level of dependability and performance in
multi-channel amplification.
The D12 uses low heat/high effieiency Class D
digital technology with 8x oversampling and 48-bit
signal processing to deliver the cleanest audio and
most efficient amplification available today. Each of
the amplifier’s 12 channels have a true power
rating of 75W into 8 Ohms and 100W into 4 Ohms
– with all channels driven.
The D12 also incorporates new, one-of-a-kind
technologies that make its setup,flexibility and
performance truly unique.
Configuring the D12 can be done via its front
panel buttons or with IR commands that reside in
ELAN’s new System Setup Software, ELAN
®
TOOLS.
From the front panel you can set input levels for
each channel individually, or for all channels at
once.You can also configure input selections for
direct stereo, mono mix-down,and A/B bussing in
both stereo and mono.
Advanced feature setup can be programmed in
ELANTOOLS and downloaded directly to the D12.
Program features such as max volume output,
min/max turn-on levels for each channel,
independent triggers that allow you to turn on and
off any mix of amp channels, link/un-link channel
pairs and more.You can even create up to three
“scenes” that, with the touch of a button, can
raise or lower specific amp channels.
What’s more, the D12’s blue graphical LCD allows
you to view all your settings and provides
important diagnostic information such as faults,
thermal warnings and impedance load per channel.
All these features, and many more, have been
incorporated into a chassis design that exceeds all
standard quality assurance testing – and then
some – making the D12 the most reliable amplifier
ever built for multi-room audio applications.
FEATURES
Designed, built and tested for outstanding
reliability and sound
Class D Digital Technology w / 8X oversampling
& 48-bit signal processing
True power ratings of 75WPC @ 8 Ohms &
100WPC @ 4 Ohms
Low heat / high efficiency
Patent-pending ACE™ Automatic Clip
Eliminator
Fault, thermal and impedance load monitoring
for each channel
Blue graphical LCD for setup, monitoring &
diagnostics
Intuitive front panel button setup
“Lockout”feature fixes settings
Programmable “scenes”
Multiple input and Bus options
Buffered loop outputs for each channel
Configurable triggers
Advance setup via ELANTOOLS software
USB port for easy download from ELANTOOLS
VIA!Net jack for control & monitoring
Ethernet jack for future upgrades, control &
monitoring
Rack-mount ears (incl.)
SPECIFICATIONS
Power Output (RMS) per channel ......100W @ 4
Ohms, 75W @ 8 Ohms (all channels driven)
Frequency Response . ............20Hz to 20kHz,
-3dB into 8 Ohms
Full Power Bandwidth . .............10Hz to25kHz
Signal-To-Noise .............> 102dB (A-weighted)
Channel Separation .....................>-70dB
(channel to channel @ 1kHz)
Total Harmonic Distortion . ...............< .04%
Intermodulation Distortion . ............< 0.1%
Input Impedance . . . . . . . . . . . . .......49k Ohms
Remote Trigger Inputs . .......5 to 24 Volts AC / DC
Trigger Loop Output . .............+12VDC @ 0.1A
AC Power Requirements . .....120VAC, 1440W
or 240VAC,1440W
Current Draw .....12A @ 120VAC / 6A @ 240VAC
Dimensions w/ Feet (3U w/o Feet)
(in.) 17 W x 5-7/8 H x 17 D
(mm) 432 W x 149 H x 432 D
Weight .....................47lbs. / 21.32kg
cTUVus,CE, IC,C-Tick,CB Scheme, FCC