Specifications

Automation & Integration
©2009 ELAN HOME SYSTEMS • LEXINGTON, KY • ALL RIGHTS RESERVED
32
Automation & IntegrationAutomation & Integration
VHTO100
HOME THEATER HIGH-POWER OVERRIDE MODULE
FEATURES
Integrates ELAN Page & Door Chime audio into
non-ELAN system areas
High-power stereo inputs & 5A-rated relays for
home theater applications
Adjustable 10-step page & door chime volume
settings
Selectable 1x, 2x & 4x impedance match
settings
Mounts anywhere
100 WPC RMS power handling capability
speakers in non-ELAN system areas such as a
Home Theater.
A 12VDC signal, transmitted from an ELAN C2
Communications Controller whenever a page or
door chime is initiated, triggers a pair of relays on
the VHTO100, switching the audio path from the
local system amplifier to the ELAN system
amplifier.
In a Home Theater, ELAN Page and Door Chime
audio can be routed to the rear channel speakers,
allowing page and door chime audio to be easily
heard.
SIM2 SENSOR INTEGRATION MODULE
SPECIFICATIONS
Relays (x2)
Type ...........NO / NC closed contact relay
Max. Rated Load Switched by Relay....0.5A @
125VAC or 1A @ 24VDC
Sense Inputs (x4)
Connector ..............3.5 mm stereo jack
Tip ...................+5V power to sensor
Ring .................Contact closure or
ELANSENSE open collector
Sleeve .......... .......... ......Ground
Power ..... ...............5VDC @ 90mA
Power Requirements .............12VDC, 2.1A
Connector Power Output .......+12VDC @ 0.65A
ORDER NO. SIM2
ORDER NO. VHTO100
The SIM2 is a low-cost, simple automation solution
designed to work seamlessly with ELAN
®
SENSE
Sensors.The SIM2 functions as a stand-alone four
sensor input/two relay output module that provides
dry contact closure or 12V output in response to
sensor input status. Built-in relays respond to
sensor triggers differently based on conditional
logic “and / or” dip switch settings on the unit.
This allows any ELANSENSE automation sensor, or
standard motion, driveway or door/window sensor,
to intelligently trigger relays on the SIM2 based on
the dip switch settings.The SIM2 is ideal for Home
Theater automation applications,or any application
that requires the use of automated triggering
through the use of sensors.
FEATURES
Simple automation solution for ELANSENSE
Automation Sensors
4 sensor inputs (1 pair for ea. relay)
2 relay outputs which provide contact closure
or 12 volts
Conditional and/or logic dipswitches provide
intelligent relay triggering
No software programming required
Mounts on any flat surface (mounting screws
& adhesive backing strip incl.)
Includes 12VDC, 2.1A Power Supply
VIA!
®
RPTR VIA!
®
NET REPEATER
The VIA!
®
NET, or the communication link between
an SS1 or SC-1 and all the VIA! Touch Panels or
Olé
®
Touchpads in a system, has a maximum total
wire-run length of 2000 feet.VIA!NET Repeaters
extend the overall wire run capabilities of the
VIA!NET, enabling up to 30 VIA! Touch Panels or
Olé Touchpads to communicate reliably with the
SS1 or SC-1 from up to 1000 feet each.
FEATURES
Extends SS1 / SC-1 / VIA! wire runs up to
1000 ft. ea. for as many as 30 VIA! Touch
Panels & Olé
®
Touchpads
ORDER NO. VIARPTR
The VHTO100 is a high-power stereo speaker
switching module that allows ELAN Page and Door
Chime audio to be automatically routed to