Specifications

Automation & Integration
©2009 ELAN HOME SYSTEMS • LEXINGTON, KY • ALL RIGHTS RESERVED
28
Automation & Integration
The VIA!
®
SR1 Sense/Relay/IR Controller provides
enhanced automation and power management
capabilities to Home Theater and whole-house
systems.
This IR- or RS-232-controlled device features six
independently configurable relay outputs that can
be used to automate motorized screens, lifts and
draperies. Eight sense inputs,triggerable by contact
closure, and eight steerable IR output ports provide
a means for intelligent power management for
Home Theater or whole-house A/V components.
Programmable “if/then/else”commands,based on the
status of each of the eight sense inputs, assure that
the movie screen won’t go UP if it’s already DOWN,or
that the TV won’t turn OFF if it’s already ON.
Use ELAN
®
SENSE sensors to trigger SR1 Sense
Inputs whenever audio, video, voltage, current,
contact closures or light are detected.
VIA!
®
-SR1 VIA! SENSE/RELAY/IR CONTROLLER
FEATURES
8 sense inputs–contact closure,TTL Logic &
ELAN
®
SENSE compatible
8 steerable IR emitter output ports
6 relay outputs–independently configurable as
normally open or normally closed, momentary
or latching
2 RS-232 serial interface ports (input & thru)
1 VIA! RJ-45 interface port
ORDER NO. VIASR1
SC-1 SERIAL CONTROLLER
ORDER NO. SC1
Short a Com Port on your SS1? Add an SC-1.
Have a serially-controlled device located too far
away from the head-end for reliable RS-232
communications? Add an SC-1.
The SC-1 is a single RS-232 to VIA!
®
Net interface
with two huge benefits.
First, the SC-1 is an easy,low-cost
way to add additional RS-232 Com
Ports to an SS1 System Station.
Simply connect any serially-
controlled device or system to the
SC-1 and plug it into a VIA!Net
port at the head end. Short two
Com Ports? Add two SC-1s. Or three,
four and more.
Secondly, the SC-1 Serial Controller solves
a long-standing problem inherent in any
system with RS-232-controlled devices or
subsystems.
More often than not, lighting, climate, security
and pool/spa systems, as well as many local
sources, are not located anywhere near the SS1 –
making it necessary to run a serial connection a
long ways back to the head-end and compromising
reliability.The SC-1 solves this problem since it can
be co-located with the serially-controlled system or
source, reducing the serial wire run to just a few
feet.VIA!Net is then used for the long run
connection back to the head-end.
The SC-1 can also be used as a stand alone
RS-232 controller for a single device.
More Com Ports.More reliable RS-232
communications.And a price your clients won’t
balk at.This is the SC-1.
FEATURES
Easily add Com Ports to any SS1
Ensures reliable RS-232 communications
regardless of device location
Low cost, huge benefits
USB port for easy direct-from-PC programming
LED activity indicator for data transmission &
troubleshooting
Ideal for reliable long-distance VIA!migo
™
iPod
®
Integration Dock control!
SPECIFICATIONS
VIA!Net IN . . ........................RJ-45
VIA!Net OUT .........................RJ-45
USB programming port
Power.......................+12VCD/50mA
CE, C-Tick, FCC part 15
NEW
FOR
2009