Specifications

complete
76
©2004 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
ACCESSORIES
The PS12 Precision Panel isn’t just a
convenient trim-out solution for the
System12 (S12). With more sources, more
zones and more built-in features than any
other ELAN multi-room controller to date,
the number of wire runs and systems
connections needed to get everything
up and running smoothly makes the PS12
a necessity.
The rear panel of the PS12 features a neatly
laid out array of all the 110 punch-downs
necessary to ensure the quick, reliable
connection of keypads, touch panels and
local sources in every zone. There are also
dedicated punch-down connectors for six
ELAN
™
SENSE sensors and VSE Electronic
Volume Control IR signals. A clearly labeled
overlay shows you both the color-code and
function of every connection. There’s even
RJ-45 jacks on the rear of the panel for an
easy link to a VIA!
®
SC4 System Controller
or the new VIA!
®
2-SS1 System Station.
The PS12’s front panel provides RJ-45 jacks
for the instant connection of keypads,
touch panels and local sources in every
zone to the back of the S12 controller.
Use ELAN C4545 one or two meter RJ-45-
to-RJ-45 interconnect cables for reliable
connections every time. Six Sense Input
jacks use stereo 3.5mm ‘mini-to-mini’
interconnect cables to go directly to the
Sense Inputs on the S12. The front panel
also features DC power jacks for 4A and
10A VIA!
®
power supplies and two antenna
connectors for the easy connection of
rooftop antennas to the ELAN DTNR Digital
Dual Tuner or any other tuner you may
have in the system.
The front panel of the PS12 is removable,
making all your rear-panel punch-downs easy.
New-construction brackets are available, or
the PS12 can easily be retro-fitted using the
four clamping legs attached to the frame,
which clamp the panel securely to drywall.
Additional panels would be required for
systems with two, three or four S12s.
The bottom line - using PS12 Precision
Panels results in a first-class, problem-free,
professional trim-out of even the largest
S12 systems.
PS12 SYSTEM12 PRECISION PANEL
FEATURES & SPECS
Precision panel for the System12
Multi-Room A/V Controller
110 punch-down connectors for all
system keypads, touch panels, local
sources and sensors
Clearly labeled overlay denotes both
color-code and function
Front panel RJ-45 jacks for plug ‘n play
connections to the S12
VIA!® DC power jacks
2 antenna jacks for system tuners
Removable front panel for easy rear
panel connections
PBKT6P Rough-In Brackets available in
packages of 6
Dimensions:
Wall cutout: ....................8" W x 10-1/2" H
204mm W x 267mm H
Installed with frame: ......9-3/4" W x 12" H
248mm W x 305mm H
The PZ600 Precision Panel facilitates the
connection of telephone service, page,
doorbell and override signals, relays and
door stations to the Z•600 Communications
Controller and ELAN S Series multi-room
controllers.
The PZ600 is one of ELAN’s new ‘half-frame’
Precision Panels. Two ‘half-frame’ panels
can be mounted in one standard-size
Precision Panel frame, giving you the
flexibility to mix and match the Precision
Panels you need to complete a neat,
problem-free trim-out.
The back of the PZ600 features standard
110 punch-downs for the connection of
incoming telephone service, two ELAN door
stations, four relays and eight volume
control override signals. There’s also an
RJ-45 jack for a quick and easy link to the
new PVSE Electronic Volume Control
Precision Panel.
The front panel of the PZ600 has RJ-11 jacks
for Telco and Phone, and RJ-45 jacks for
Relays, Override Control and two Door
Stations. All just plug right into the back
of the Z•600 Communications Controller.
Doorbell one and two ELAN
™
SENSE jacks
are also provided for easy connection to
System12 (S12) or System6 Sense Inputs, as
is a Page/Doorbell Out jack for connection
to the S12. A front panel DC power jack
allows you to connect an ELAN power
supply if using multiple volume controls
with override.
PZ600 Z•600 PRECISION PANEL
FEATURES & SPECS
1/2-frame precision panel for the
Z•600 Communications Controller
110 punch-down connectors for
telephones, override, relays and
door stations
Clearly labeled silkscreen for
error-free terminations
Front panel RJ-45/RJ-11 and ‘mini’
jacks for plug ‘n play connections to
the Z•600, S12 and S6
DC power jack for powering additional
volume controls with override
PWR12 12V, 2A power supply included
Fits in PF2 Precision Panel Frame
(required for installation, see pg. 82)
Ac_FINAL.qxd 1/24/05 5:01 PM Page 76